Additional Notes for 2007-2008 Kingpin Low Beam
In addition to the installation notes provided here, the following modifications are required for the LOW BEAM ONLY, for the following model years: 2007 & 2008 Kingpin. THESE INSTRUCTIONS DO NOT APPLY TO ANY OTHER MODELS.
|1.) Remove OEM low beam
bulb from headlight.
|2.) Unplug bulb from plastic housing.||3.) Drill or cut a hole from bottom of the bulb.||4.) Use care not to destroy the plastic housing.||5.) Run HID bulb wires through the hole.|
Your IP Address is: 22.214.171.124